TL-WA5110G
Product Details
The TL-WA5110G 400mW 54M High Power Wireless Access Point is dedicated to Small Office/Home Office (SOHO) and long distance wireless network solutions. It integrates the functions of a Wireless Access Point, WISP Client, Firewall, and NAT-Router.
SpecificationData Rates :
Network Configuration : IEEE 802.11b/g
Radio Signal Type : 2.4-2.4835GHz
Encryption :
- SSID Enable/Disable
- MAC Address Filter
- 64/128/152-bit WEP Encryption
- WPA/WPA2/WPA-PSK/WPA2-PSK (AES/TKIP)
Modulation :
- IEEE 802.11b: DQPSK, DBPSK, DSSS, and CCK
- IEEE 802.11g: BPSK, QPSK, 16QAM, 64QAM, OFDM
Output Power :
- Wireless Transmit Power (MAX)
- <20dBm (EIRP, For countries using CE Standards)
- <27dBm (Peak, For countries using FCC Standards)
Dimensions : 6.5×4.2×1.1 in. (165×108×28mm)
Network Connection : LAN: 1-10/100M Ethernet Port (RJ45)
Antenna : 4dBi Detachable Omni Directional Antenna (Reverse SMA Connector)
Standards Protocol : IEEE 802.11g, IEEE 802.11b
Features :
- Supports AP Client Router, AP Router and AP operation mode
- High output transmission power and reception sensitivity optimized
- Supports WISP Mode (PPPoE client on wireless interface)
- Supports Passive Power over Ethernet
- Supports Wireless Distribution System (WDS)
- Distance Adjustment for long range transmission, up to 50km
- Supports Antenna Alignment
- Supports Layer 2 User Isolation
- Provides throughput monitor indicating the current wireless throughput
- Supports Ping Watch Dog
- Supports Link Speed Test
- Supports Remote Management
- Supports PPPoE, Dynamic IP, Static IP Internet Access
- Built-in NAT and DHCP server supporting Address Reservation
- Supports UPnP, Dynamic DNS, Static Routing, VPN Pass-through
- Supports Virtual Server, Special Application and DMZ host
- Provides 64/128/152-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security and TKIP/AES encryption WLAN ACL (Access Control List)
- Supports configuration backup/restore and firmware upgrades
0 comments:
Post a Comment